Upgrade to Heat Pump Hot Water From $999
Licensed Melbourne installers · Clear, upfront pricing · One-visit installation
0438 682 752
Call us now!
Why Upgrade?
- Up to 3–4× more efficient than electric resistance (lower running costs)
- Cheaper to run than most gas systems; future-proof against gas price rises
- Works year-round in Melbourne’s climate; cold-weather models available
-
Quiet operation & fast recovery, great for households with high hot-water use
-
Lower carbon footprint; eligible for Victorian energy-efficiency incentives
- Clean, safe changeover with removal of old unit and tidy installation
Heat Pump Free Quote
Licensed Melbourne installers · One-visit installation · COES & VBA certificates.
Tell us about your hot water so we can size the right 170–300 L heat pump and give you a clear, upfront price.
Standard back-to-back changeovers from $999 with tidy, one-visit install.
What You Get from $999
Supply & Installation
- Heat pump hot water system sized to household demand (e.g., 170–300 L).
- Back-to-back changeover at/near existing location with clear access.
- All standard plumbing & electrical connections completed in one visit.
Plumbing Components & Safety
- Tempering valve set to ≤ 50 °C at outlets (scald prevention).
- Pressure limiting/dual check valve installed to spec.
- T&P relief valve with compliant drain line.
- Insulated hot/cold lines within immediate work area.
Electrical Works
- Dedicated circuit and lockable isolator (as required by unit spec).
- RCBO installed where needed for protection (AS/NZS 3000).
- Weatherproof GPO or hard-wired connection per manufacturer requirements.
System Siting & Noise Considerations
- Unit positioned for clear airflow and condensate drainage.
- Neighbour-friendly placement (noise comparable to a split A/C on low).
- Mounting slab or wall brackets supplied where required.
Commissioning & Handover
- Leak, pressure, and performance checks; verify heat cycle and recovery.
- Controller setup (timers/eco mode; solar PV scheduling if applicable).
- Owner walkthrough + printed/emailed user guide and maintenance tips.
Certificates & Compliance
- COES – Certificate of Electrical Safety issued for all electrical works.
- VBA Plumbing Compliance Certificate for the hot water install.
- Work completed to AS/NZS 3000 (wiring rules) and AS/NZS 3500 (plumbing).
Removal & Disposal
- Disconnect, remove, and responsibly dispose of the old hot water unit.
- Site left clean and tidy; packaging removed.
Customer Testimonials
September 2024
Deegan did an outstanding job disconnecting our old heater. He was not only incredibly efficient but also very friendly and professional throughout the entire process. His expertise was evident from start to finish, and we couldn’t be more pleased with his work. Highly recommend Deegan for anyone in need of exceptional service!
September 2024
The whole experience was fantastic, with a great team of people arriving, on time, to complete a long list of items around my home. Everyone was polite & ensured that things were as I wanted, with ongoing confirmation regarding anything that needed clarification. Everything was left clean & tidy, with new appliances all checked & demonstrated.
I highly recommend using Elite Trades Australia & will happily engage them if I have future requirements.
September 2024
Tim and Rami replaced our old hot water system with Emerald All-In-One Heat Pump Heater on 16/9/2024. They're very professional and polite. Did great job installing, took away old heater and cleaned all rubbish away. Gave me detailed information about operation of the system. All was done quickly with smiles and everything is working well.
September 2025
Jack and the boys came to connect our new hot water system and they were amazing! They were all so friendly and respectful and got the job done no issues. Highly recommend this company with no hesitation! I'd give more than 5 stars if I could!
July 2025
Alex and Arian replaced my old heat pump with a new system in less than two hours while the wind speed was 70km/h and they didn’t complain. They took all the rubbish. The job was completed with a neat and clean finish. They were very professional and well mannered and I was asked how I preferred the wiring to be, they even drained the old system’s water outside the property. they didn’t mess up my property they used the old screw holes and couldn’t tell that the system was replaced that’s how good the final result was. I am very happy and will use them again.
January 2025
Jack and Luke installed my heat pump at my place. 5 star service from scheduling to installation. Thank you again!
Frequently Asked Questions
How will a heat pump hot water system lower my power bills?
- Heat pumps use ambient air to heat water instead of relying on direct electrical resistance. This process consumes up to 70% less electricity, significantly reducing your ongoing energy costs compared to traditional electric or gas systems.
What makes a heat pump more energy-efficient than other systems?
- Rather than generating heat, a heat pump transfers it from the surrounding air into the water storage tank. This makes it far more efficient, especially in moderate climates like Melbourne’s, delivering maximum performance with minimal energy use.
Can upgrading to a heat pump help cut carbon emissions?
- Yes. Because heat pumps use less power, they lower your household’s carbon footprint. When powered by solar or renewable energy sources, they can provide near-zero-emission hot water.
How does a heat pump actually heat the water?
- The system absorbs heat from the air using a refrigerant, compresses it to increase the temperature, and transfers that heat into the water tank. It’s the same proven technology used in reverse-cycle air conditioning, applied to water heating.
How long will the hot water last?
- Most systems store 200–300 litres of hot water, enough for the average household. High-efficiency insulation keeps the water hot for extended periods, so you’ll always have a consistent supply even during peak use.
Are the systems and components high quality?
- Absolutely. We only install systems from trusted, industry-leading brands backed by Australian warranties. Each installation is carried out by licensed technicians and tested to meet our performance and durability standards.
Only Licensed Professionals Install Our Heat Pump Systems
Our installations are carried out exclusively by fully licensed electricians and plumbers, ensuring every system is installed safely, efficiently, and to Australian standards.
From removal of your old unit to commissioning your new energy-efficient heat pump, our team handles the entire process with precision and care.
