POWERPOINT INSTALLATION AND REPAIRS
Add new powerpoints, fix damaged outlets and upgrade old fittings. Licensed and insured Melbourne electricians with clean, compliant work.
0438 682 752
Call us now!
Why upgrade your powerpoints?
Many homes are short on powerpoints and rely on double adaptors, power boards and extension leads. This can be messy, inconvenient and in some cases unsafe, especially with high draw appliances.
Professional powerpoint installation gives you outlets where you actually need them and makes sure wiring is safe, properly protected and compliant with current standards.
- Reduce reliance on power boards and double adaptors
- Safer supply for high demand appliances and chargers
- More convenient outlets in bedrooms, living areas and home offices
- Tidy, professional finish instead of loose extension leads
- Wiring and protection brought back in line with current standards
Powerpoint Installation and Repairs Melbourne
Licensed Melbourne electricians.
We install new powerpoints and repair or replace damaged outlets in homes and small businesses.
Tell us a few details about your home, where you need outlets and any issues you are having so we can recommend the best approach and provide a clear, fixed price.
We handle everything from adding a single extra outlet to full room upgrades, outdoor powerpoints and repairs to cracked or burnt fittings. All work is tested and completed to AS/NZS 3000 wiring rules with neat, reliable results.
What We Provide
New Powerpoint Installation
- Additional outlets in bedrooms, living areas, kitchens and home offices
- New wiring and circuits where required
- Placement planned to suit how you actually use each room
Powerpoint Repairs and Replacements
- Repair or replacement of cracked, loose, discoloured or burnt outlets. We isolate the circuit, fix the wiring and fit new, compliant powerpoints.
Upgraded and USB Powerpoints
- Installation of modern powerpoints with USB charging, extra sockets or slimline plates so you can charge devices without bulky adaptors.
Outdoor and Weatherproof Powerpoints
- Weatherproof outlets for patios, alfrescos, pools and garden areas. Suitable for outdoor fridges, pumps, heaters and other equipment.
Dedicated Circuits for Appliances
- New outlets and dedicated circuits for high demand appliances such as fridges, freezers, microwaves, washers and dryers where required.
Safety Checks and Testing
- Testing of circuits and protection devices when new powerpoints are installed, with repairs recommended if we find unsafe or non compliant wiring.
Licensed Electricians
- All powerpoint installation and repair work is carried out by licensed and insured electricians, with clear communication and tidy workmanship.
Customer Testimonials
September 2024
Deegan did an outstanding job disconnecting our old heater. He was not only incredibly efficient but also very friendly and professional throughout the entire process. His expertise was evident from start to finish, and we couldn’t be more pleased with his work. Highly recommend Deegan for anyone in need of exceptional service!
September 2024
The whole experience was fantastic, with a great team of people arriving, on time, to complete a long list of items around my home. Everyone was polite & ensured that things were as I wanted, with ongoing confirmation regarding anything that needed clarification. Everything was left clean & tidy, with new appliances all checked & demonstrated.
I highly recommend using Elite Trades Australia & will happily engage them if I have future requirements.
September 2024
Tim and Rami replaced our old hot water system with Emerald All-In-One Heat Pump Heater on 16/9/2024. They're very professional and polite. Did great job installing, took away old heater and cleaned all rubbish away. Gave me detailed information about operation of the system. All was done quickly with smiles and everything is working well.
September 2025
Jack and the boys came to connect our new hot water system and they were amazing! They were all so friendly and respectful and got the job done no issues. Highly recommend this company with no hesitation! I'd give more than 5 stars if I could!
July 2025
Alex and Arian replaced my old heat pump with a new system in less than two hours while the wind speed was 70km/h and they didn’t complain. They took all the rubbish. The job was completed with a neat and clean finish. They were very professional and well mannered and I was asked how I preferred the wiring to be, they even drained the old system’s water outside the property. they didn’t mess up my property they used the old screw holes and couldn’t tell that the system was replaced that’s how good the final result was. I am very happy and will use them again.
January 2025
Jack and Luke installed my heat pump at my place. 5 star service from scheduling to installation. Thank you again!
Frequently Asked Questions
Do I need an electrician to install a powerpoint?
- Yes. Powerpoints are hard wired fittings and must be installed or altered by a licensed electrician. This keeps the wiring, protection and testing in line with current electrical standards.
Can you add a powerpoint where there is currently only a light or no fitting at all?
- In many cases yes. We can often run new cabling from an existing circuit or the switchboard to create new outlets. On site we will confirm the best route, whether a new circuit is needed and any limitations based on access.
What are the signs a powerpoint is unsafe?
-
Signs include cracks in the plate, burn marks or discolouration, a hot or warm outlet, buzzing or crackling noises and plugs that feel loose. If you notice any of these, stop using that outlet and contact an electrician.
Can you install USB powerpoints in place of my existing outlets?
- Yes. In many cases we can replace standard powerpoints with USB combination outlets in the same location, provided the wiring and back box are suitable. This is common in kitchens, bedrooms and home offices.
What happens during a powerpoint installation or repair?
- We start by confirming locations and any issues you are having. We then isolate the circuit, carry out wiring and installation, secure and level the outlet, and test the circuit and outlet before turning the power back on. Once everything is working, we clean up and walk you through what has been done.
