SPLIT SYSTEM INSTALLATION
Efficient heating and cooling installed by licensed and insured electricians. Supply and install of split system air conditioners across Melbourne.
0438 682 752
Call us now!
Why install a split system?
Reverse cycle split systems are one of the most efficient ways to heat and cool a single room or open living space. They give you year round comfort with lower running costs compared to many portable heaters or old electric units.
A professional installation makes sure your split system is sized correctly, mounted in the right position and wired safely so you get the best performance and reliability.
- Energy efficient heating and cooling from one unit
- Better temperature control for bedrooms and living areas
- Cleaner air with built in filtration and dehumidifying
- Lower running costs compared to many older systems
- Safe, compliant electrical and refrigeration work
Split System Supply and Installation
Licensed Melbourne electricians and refrigeration technicians.
We supply and install split system air conditioners for homes and small businesses across Melbourne.
Tell us a few details about your home so we can size the right unit, confirm installation details and provide a clear, fixed price.
We handle new installations, replacement of old systems and relocation of existing units where suitable.
Standard back to back installations include mounting of the indoor and outdoor units, penetration through the wall, electrical connection, commissioning and a tidy, one visit installation where possible.
What we can provide
New Split System Installation
- Assessment of room size and layout to pick a suitable capacity
- Supply and installation of quality reverse cycle split systems
- Indoor and outdoor units mounted in suitable locations with tidy pipework and cabling
- Connection to power, testing and commissioning
Replacement of Old Units
- Safe removal and disposal of old split systems, with upgrade to a modern, efficient unit that fits your space and electrical setup.
Back to Back Installations
- Standard back to back installations where indoor and outdoor units are mounted on opposite sides of the same wall. Efficient, neat and cost effective for many homes.
Non Standard and Multi Room Options
- Solutions for longer pipe runs, difficult locations or multi room setups, including roof or wall brackets for outdoor units and condensate pumps where needed.
Electrical and Circuit Upgrades
- Dedicated circuits, isolators and switchboard checks so your new system runs safely without overloading existing wiring.
Servicing and Basic Maintenance
- Basic cleaning and maintenance on existing units at the time of installation or replacement, and advice on how to keep filters clean and the system running well.
Licensed Electricians
- All work carried out by licensed electricians and appropriately licensed refrigeration technicians, with compliant installation and required documentation.
Customer Testimonials
September 2024
Deegan did an outstanding job disconnecting our old heater. He was not only incredibly efficient but also very friendly and professional throughout the entire process. His expertise was evident from start to finish, and we couldn’t be more pleased with his work. Highly recommend Deegan for anyone in need of exceptional service!
September 2024
The whole experience was fantastic, with a great team of people arriving, on time, to complete a long list of items around my home. Everyone was polite & ensured that things were as I wanted, with ongoing confirmation regarding anything that needed clarification. Everything was left clean & tidy, with new appliances all checked & demonstrated.
I highly recommend using Elite Trades Australia & will happily engage them if I have future requirements.
September 2024
Tim and Rami replaced our old hot water system with Emerald All-In-One Heat Pump Heater on 16/9/2024. They're very professional and polite. Did great job installing, took away old heater and cleaned all rubbish away. Gave me detailed information about operation of the system. All was done quickly with smiles and everything is working well.
September 2025
Jack and the boys came to connect our new hot water system and they were amazing! They were all so friendly and respectful and got the job done no issues. Highly recommend this company with no hesitation! I'd give more than 5 stars if I could!
July 2025
Alex and Arian replaced my old heat pump with a new system in less than two hours while the wind speed was 70km/h and they didn’t complain. They took all the rubbish. The job was completed with a neat and clean finish. They were very professional and well mannered and I was asked how I preferred the wiring to be, they even drained the old system’s water outside the property. they didn’t mess up my property they used the old screw holes and couldn’t tell that the system was replaced that’s how good the final result was. I am very happy and will use them again.
January 2025
Jack and Luke installed my heat pump at my place. 5 star service from scheduling to installation. Thank you again!
Frequently Asked Questions
What size split system do I need for my room?
- The right size depends on the room area, ceiling height, insulation and how much glass is in the space. As a rough guide, small bedrooms often use units around 2 to 2.5 kW and larger living areas can need 5 to 7 kW or more. We will assess your room and recommend a suitable capacity.
Can you supply the split system or do I need to buy my own?
- We can either supply a suitable unit from trusted brands or install a unit you have already purchased. If you already have a system, we will confirm that it is the right size and suitable for your home before installation.
What is a back to back installation?
- A back to back installation is where the indoor and outdoor units are mounted on opposite sides of the same wall. This keeps pipe runs short, reduces labour and usually provides the most cost effective option.
Do I need a dedicated circuit for my split system?
- Most split systems require a dedicated circuit and isolator to comply with current standards and to avoid overloading existing power circuits. We will check your switchboard and install any required cabling and protection.
What is involved on installation day?
- We confirm locations for indoor and outdoor units, protect work areas, complete drilling and mounting, run pipework and cabling, connect power, evacuate and charge the system if needed, then test heating and cooling modes. Once everything is working, we show you how to use the controls and leave the area tidy.
